Unico Pumps ( A Unit Of Kenly Plasto Chem)
Mumbai, Maharashtra
GST No. 27ADCPC6726G1ZS
TrustSEAL Verified
Call 08048969257 52% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model | NP-15 |
| Max Flow Rate | 15 LPM |
| Brand | Numatic Pumps |
| Material | Polypropylene (PP) |
| Head | 3.5 Meters |
| Voltage | 220 |
| End Connection | 14 Nozzel Type |
Model No - NP-15.
MOC: Polypropylene (PP) Moulded Casing & Impeller.
Max Head: Upto 3.5 Mtr.
Max Flow: 15 Liter per Minute.
Discharge Capacity: 0.9 m3/hr.
Inlet & Outlet: 14mm x 14mm (Nozzle Type).
Motor Specification: 0.05 HP, 2800 R.P.M, 50 Hz 1phase.
Fluid Temperature: 70 C (Max).
Shaft: Ceramic.
Seal Type: Sealless.
Standard Duty: 0.35 KG/CM
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model | NP 150 |
| Max Flow Rate | 150 LPM (9 m3/hr) |
| Brand | Numatic Pumps |
| Material | Polypropylene |
| Head | 14 meter |
| Voltage | 220 / 440 |
| End Connection | 25 mm (Nozzel / Threaded) |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model | NP-300 |
| Max Flow Rate | 280 |
| Brand | Numatic Pumps |
| Material | Polypropylene (PP) |
| Head | 20 |
| Voltage | 440 |
| End Connection | Threaded Type |
Model No - NP-300
MOC : Polypropylene (PP) Moulded Casing & Impeller.
Max Head : Upto 20 Mtr.
Max Flow : 280 Leter per Minute
Discharge Capacity : 16.8 m3/hr
Inlet & Outlet : 40mm x 40mm (Threaded Type)
Motor Specification : 1.5 HP, 2800 R.P.M, 50 Hz, 1/3 Phase.
Fluid Temprature : 70° C (Max)
Shaft : Ceramic
Seal Type : Sealless
*NP-300 Pumps flange set is available at Rs. 600/- Extra
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model | NP-500 |
| Max Flow Rate | 480 |
| Brand | Numatic Pumps |
| Material | PP (Polypropylene) |
| Head | 30 |
| Voltage | 440/220 |
| End Connection | Threaded Type |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model | NP-30 |
| Max Flow Rate | 30 |
| Brand | Numatic Pumps |
| Material | Polypropylene (PP) |
| Head | 5 |
| Voltage | 220 |
| End Connection | 18 mm Nozzel Type |
PP Magnetic Drive Pump
Model No - NP-30
MOC : Polypropylene (PP) Moulded Casing & Impeller.
Max Head : Upto 5 Mtr.
Max Flow : 30 Leter per Minute
Discharge Capacity : 1.8 m3/hr
Inlet & Outlet : 18mm x 18mm (Nozzle Type)
*NP-30 Pumps available in Treaded end Connection at Rs. 600/- Extra
Motor Specification : 0.09 HP, 2800 R.P.M, 50 Hz 1Phase.
Fluid Temprature : 70° C (Max)
Shaft : Ceramic
Seal Type : SeallessAdditional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Motor Horsepower | 0.5 HP, 1 HP, 8 HP, 5 HP, 10 HP, 2 HP, 3 HP, 6.5 HP, 0.05 HP |
| Head | 3.5 - 34 Meters |
| Material | Polypropylene |
| Type of end use | Industrial, Resale |
| Motor Phase | Single Phase, Three Phase |
| Power Source | Electric |
| Material of Construction | Stainless steel, Polypropylene |
| Brand | Numatic Pumps |
| Model | NP Series |
Product Description:
Numatic Pumps Offer Sealless/Glandless Magnetic Drive Sealless Centrifugal Pumps in PP PVDF Material.
Features:
Designed for “Zero Leakage”
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Number |
| Motor Horsepower | 10 HP, 5 HP, 3 HP, 6.5 HP, 0.5 HP, 8 HP, 2 HP, 1 HP |
| Head | 3.5 - 34 Meters |
| Max Flow Rate | 15 - 620 LPM |
| Type of end use | Industrial, Resale |
| Motor Phase | Three Phase, Single Phase |
| Motor Speed (RPM) | 2800 |
| Power Source | Electric |
| Material of Construction | Stainless steel , Polypropylene |
| Condition | New |
| Brand | Numatic Pumps |
| Model | NP Series |
| Material | Polypropylene |
| Min Flow Rate | 15 LPM |
| Min Head | 3.5 Meters |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model | NP-650 |
| Max Flow Rate | 620 LPM |
| Brand | Numatic Pumps |
| Material | PP (Polypropylene) |
| Head | 34 Meters |
| Voltage | 420 / 440 |
| End Connection | NSP Treaded end Connection |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Motor Phase | Three Phase, Single Phase |
| Power Source | Electric |
| Material of Construction | Polypropylene |
| Condition | New |
| Flow | 1 ltrs/min to 520 ltrs/min |
| Maximum Capacity | 50-100 L/min |
Polypropylene Magnetic Pumps offered by us are manufactured by keeping a keen eye on the quality control at each level of production. SPE series seal proof & seal less pumps are ideal for usage in the handling of toxic, noxious, inflammable or corrosive liquid. NOx or freon gas and others are efficiently handled by these pumps, as leakage of these gases or liquids cannot be tolerated. These products are manufactured using stainless steel and are widely adopted by the process industries that have concern for the safety of the environment, plant personnel and high ongoing cost required for the mechanical seal maintenance. Following are the details of the products offered by us:
Application Areas:
Additional Information: